Ihe nkiri Thermoplastic Polyurethane (TPU) agbanweela ụlọ ọrụ site na ejiji gaa na mbara ikuku yana nchikota pụrụ iche nke mgbanwe, ịdịte aka na ngbanwe. Ntuziaka a na-emikpu n'ime ụdị ihe nkiri TPU abụọ dị egwu:Ihe nkiri TPU mara mma nke na-enweghị mmiri na-ekpuchi igwe ojiinaIhe nkiri TPU dị elu na nke dị ala, na-enyocha ihe onwunwe ha, usoro mmepụta ihe, na ngwa ụwa n'ezie.
Nkeji 1: Ihe nkiri TPU mara mma na-enweghị mmiri na-ekpuchi igwe ojii
Gịnị Na-eme Ka Ọ Pụrụ Iche?
Ọpụrụiche aIhe nkiri TPUna-ejikọta:
- Nchapụta anya: 92% nnyefe ọkụ (ASTM D1003)
- Mmiri mmiri ozuzo: Mmiri kọntaktị akụkụ>110°
- Mmetụta Iridescent: Nano-layered nnyonye anya pigmenti
- Nbipụta: CMYK/ Ihuenyo/Pad ndakọrịta
Nkọwa nka nka
| Ngwongwo | Oke ọnụ ahịa |
|---|---|
| Ọkpụrụkpụ | 0.05mm - 2.0mm |
| Ike ọdụdọ | 25-50 MPa |
| Elongation na ezumike | 400% - 600% |
| Ike Adhesion | 3-8 N/cm |
Usoro nrụpụta
- Njikọ-extrusion: Multi-layer Ọdịdị maka agba / mmetụta mbanye
- Ọgwụgwọ elu: Corona/Plasma ịgbalite maka ntinye akwụkwọ
- Ntinye pigmenti: Micro-encapsulated iridescent ahụ
- Nkwụsi ike UVIhe mgbakwunye 5% HALS maka ịdịte aka n'èzí
Ngwa
- Uwe egwuregwu: Akara ngosi ngosi mmiri na-adịghị na jaket egwuregwu
- Eletrọnịkị ndị ahịa: Mkpuchi ekwentị Prismatic
- Nkwakọ ngwaahịa: Hụ-site na mgbochi mmiri maka ngwongwo okomoko
- Ihe nkiri ihe owuwu: Ihe mkpuchi facade na-agbanwe agbanwe na-agbanwe na akụkụ ọkụ
Nkeji 2: Ihe nkiri TPU dị elu na nke dị ala
Oke Environment Performance
Ihe nkiri ndị a arụpụtara arụ ọrụ na-arụ ọrụ n'ofe:
- Oke okpomọkụ dị elu: -40°C ka +150°C na-aga n'ihu iji
- Mgbanwe Ọkụ dị ala: Na-anọgide na-agbanwe agbanwe na -60C
- Thermal kwụsie ike: <2% mbelata na 120°C/hrs
Arụmọrụ atụnyere
| Ọnọdụ | Ọkọlọtọ TPU | HT/LT TPU |
|---|---|---|
| 150°C Nguzogide Okpomọkụ | Deforms na 15 min | Stable maka awa 500+ |
| -50°C mgbanwe | Ọkpụkpụ mgbaji | 200% elongation |
| Ịka nká (70°C) | Na-acha odo odo n'ime izu 1 | Enweghị mgbanwe na 6 mos |
Nkwalite mmebe isi
- Ihe mgbakwunye ọkụ ọkụ: Polycarbodiimide stabilizers
- Plasticizers dị ala: Ngwakọta ester dabeere na bio
- Nkwanye: 15% Glass microspheres ngwakọ
Ngwa ụlọ ọrụ mmepụta ihe
- Ụgbọala: Ngwunye njikota igwe bay bay
- Igwe ikuku: Cryogenic mmanụ mkpuchi mkpuchi
- Ngwa dị n'èzí: Arctic njem akụrụngwa akara
- Ụlọ ọrụ mmepụta ihe: Igwe na-ebufe eriri ọkụ ọkụ
Nkeji 3: Ịhọrọ n'etiti ụdị ihe nkiri TPU
Matrix mkpebi
| Ihe achọrọ | Iridescent Agba TPU | HT/LT TPU |
|---|---|---|
| Mkpesa mara mma | ★ ★ ★ ★ ★ | ★ ★☆ |
| Nguzogide okpomọkụ | -20°C ruo +80°C | -60°C ruo +150°C |
| Ọnụ mmepụta | 8–15/m² | 20–35/m² |
| Etiti oge | 2-3 izu | 4-6 izu |
| MOQ | 500m² | 1,000 m² |
Nkeji 4: Ọnọdụ ụlọ ọrụ (mmelite 2024)
- Ngwakọta akwa akwa Smart
- 35% nke ihe nkiri TPU iridescent na-etinyezi ink na-eduzi maka teknụzụ wearable
- Nkwagide Push
- Ihe nkiri TPU dabere na bio na-eto na 22% CAGR (2023-2030)
- Sistemu eji emegharị ihe mechiri emechi maka ihe mkpofu mmepụta
- Dị gịrịgịrị & sie ike
- Ihe nkiri 0.03mm dị oke mkpa na-abanye n'ahịa ngwaọrụ ahụike
- Nano-mkwado na-akwalite ike anya mmiri site na 40%
FAQ: Ngwọta ihe nkiri TPU
Q1: Enwere ike mechie ihe nkiri TPU iridescent?
A: Ee-Jiri 130-150°C akara ọkụ na anwụ nke Teflon kpuchie.
Q2: Gịnị bụ ndụ nke HT/LT TPU na engine compartments?
A: 5-8 afọ na ezigbo UV nkwụsi ike (ISO 4892-3 nwalere).
Q3: Ọnụ ahịa kacha nta?
A: ọkọlọtọ: 500m² maka iridescent, 1,000m² maka HT/LT. Usoro omenala chọrọ 3,000m²+.
Q4: Kedu ka esi ehicha ihe nkiri TPU ebipụta?
A: Jiri pH-anọpụ iche Cleaners. Zere acetone / mmanya iji gbochie mbugharị pigmenti.
Q5: Asambodo dị?
Ụkpụrụ ndị nkịtị:
- Nweta/ROHS
- UL 94 V-0 (Ọkụ na-egbochi ọkụ)
- ISO 10993-5 (Biocompatibility)
Ọmụmụ Okwu mmejuputa
Ikpe 1: Onye nrụpụta akpa akpa okomoko
- Ihe ịma aka: Mepụta mkpuchi mkpuchi mmiri ma chọọ mma
- NgwọtaIhe nkiri TPU 0.2mm iridescent nwere mkpuchi mgbochi
- Nsonaazụ: 23% ahịa na-abawanye site na akara ngosi "weatherproof elegance".
Ikpe 2: Onye na-eme batrị eletrik
- Ihe ịma aka: Wepu modul batrị site na -40°C ruo +120°C swings
- Ngwọta: 1.5mm HT / LT TPU nwere nkwado seramiiki
- Nsonaazụ: Gafere ule nchekwa UN38.3 yana nrụrụ ọkụ 0%.
Atụmatụ nlekọta na nchekwa
- Ihe nkiri TPU dị egwu
- Na-echekwa na 15-25°C/40–60% RH
- Jiri eriri ntọhapụ silicone n'oge ikpokọta
- Ihe nkiri HT/LT
- Zere ikpughe UV tupu ngwa ngwa
- Kpochapụ ya na 80 Celsius C / awa 2 ma ọ bụrụ na echekwara ya n'okpuru 10 Celsius
Kedu ihe kpatara ya na ndị na-eweta TPU pụrụ iche?
- Ụlọ nyocha nhazi omenala: 72-hour ngwa ngwa prototyping
- Nlele n'ime ụlọ: ISO-kwenyere thermal/mechanical analysis
- Nlele dijitalụ: nhụta AR nke mmetụta iridescent
- Global Logistics: Mbupu na-achịkwa ihu igwe maka ihe nkiri nwere mmetụta
Site na ejiji na-aga n'ihu iridescent mechaa ruo ihe mgbochi ọkụ dị egwu, ihe nkiri TPU dị elu na-aga n'ihu na-akwalite oke sayensị ihe onwunwe. Ịghọta ụdịdị ndị a pụrụ iche na-enye ndị na-emepụta ihe na ndị injinia ike ịmepụta ngwaahịa ndị na-alụ di na nwunye nwere oke ọrụ.
Achọrọ enyemaka ịhọrọ ihe nkiri TPU ziri ezi?[Kpọtụrụ ndị ọkà mmụta sayensị ihe onwunwe anyị]maka ndụmọdụ teknụzụ n'efu.
Oge nzipu: Mar-05-2025